3COM 3C13880, 3C13751, 3C13701, 3C13759, 3C13755 User Manual

...
0 (0)
3Com Router 5000 Family and Router 6000 Family Module Guide
3C13701 3C13751 3C13755 3C13759
3C13840 3C13880
www.3Com.com
Part Number: 10015049 Rev AA
March 2006
Copyright © 2006, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by
any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission
from 3Com Corporation.
3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without
obligation on the part of 3Com Corporation to provide notification of such revision or change.
3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or expressed,
including, but not limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality, and fitness for a
particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s) described in this
documentation at any time.
If there is any software on removable media described in this documentation, it is furnished under a license agreement included
with the product as a separate document, in the hard copy documentation, or on the removable media in a directory file named
LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please contact 3Com and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software described herein are provided to you
subject to the following:
All technical data and computer software are commercial in nature and developed solely at private expense. Software is
delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as
defined in FAR 2.101(a) and as such is provided with only such rights as are provided in 3Com’s standard commercial license for
the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR
52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided on any
licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in
other countries.
3Com, the 3Com logo, are registered trademarks of 3Com Corporation.
Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and Windows NT are
registered trademarks of Microsoft Corporation.
exclusively through X/Open Company, Ltd.
All other company and product names may be trademarks of the respective companies with which they are associated.
UNIX is a registered trademark in the United States and other countries, licensed
3Com Corporation
350 Campus Drive
Marlborough, MA
01752-3064
3Com Router 5000 and Router 6000 v2.41 Module Guide

Table of Contents

Table of Contents
Chapter 1 Overview....................................................................................................................... 1-1
1.1 Types of SICs .................................................................................................................... 1-1
1.2 Types of MIMs ................................................................................................................... 1-1
1.3 Types of FICs..................................................................................................................... 1-2
1.4 SIC/MIM Purchasing Guideline.......................................................................................... 1-3
1.5 Installation/Removal of SIC and MIM ................................................................................ 1-3
1.5.1 Installing/Removing SIC.......................................................................................... 1-4
1.5.2 Installing/Removing MIM......................................................................................... 1-5
1.5.3 Installing/Removing an FIC ..................................................................................... 1-6
1.6 Troubleshooting ................................................................................................................. 1-7
Chapter 2 Smart Interface Cards (Router 5000)......................................................................... 2-1
2.1 Router 1-Port 10/100 SIC .................................................................................................. 2-1
2.1.1 Interface Attributes .................................................................................................. 2-1
2.1.2 Interface Cable........................................................................................................ 2-2
2.1.3 Connecting the Interface Cable............................................................................... 2-2
2.2 Router 1-Port Serial SIC .................................................................................................... 2-3
2.2.1 Introduction.............................................................................................................. 2-3
2.2.2 Appearance............................................................................................................. 2-4
2.2.3 Interface Attributes .................................................................................................. 2-5
2.2.4 Interface LEDs......................................................................................................... 2-6
2.2.5 Interface Cable........................................................................................................ 2-6
2.2.6 Connecting Interface Cable..................................................................................... 2-8
2.3 Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC ........................................... 2-9
2.3.1 Introduction.............................................................................................................. 2-9
2.3.2 Appearance............................................................................................................. 2-9
2.3.3 Interface Attributes ................................................................................................ 2-10
2.3.4 Interface LEDs....................................................................................................... 2-10
2.3.5 Interface Cable...................................................................................................... 2-11
2.3.6 Connecting Interface Cable................................................................................... 2-12
2.4 Router 1-Port Fractional E1 SIC ...................................................................................... 2-13
2.4.1 Introduction............................................................................................................ 2-13
2.4.2 Appearance........................................................................................................... 2-13
2.4.3 Interface Attributes ................................................................................................ 2-13
2.4.4 DIP Switch............................................................................................................. 2-14
2.4.5 Interface LEDs....................................................................................................... 2-16
2.4.6 Interface Cable...................................................................................................... 2-17
2.4.7 Connecting Interface Cable................................................................................... 2-18
2.5 Router 1-Port Fractional T1 SIC ...................................................................................... 2-20
i
3Com Router 5000 and Router 6000 v2.41 Module Guide
Table of Contents
2.5.1 Introduction............................................................................................................ 2-20
2.5.2 Appearance........................................................................................................... 2-20
2.5.3 Interface Attributes ................................................................................................ 2-20
2.5.4 Interface LEDs....................................................................................................... 2-21
2.5.5 Interface Cable...................................................................................................... 2-22
2.5.6 Connecting Interface Cable................................................................................... 2-22
2.6 Router 1-Port Analog Modem SIC................................................................................... 2-23
2.6.1 Introduction............................................................................................................ 2-23
2.6.2 Appearance........................................................................................................... 2-23
2.6.3 Interface Attributes ................................................................................................ 2-23
2.6.4 Interface LEDs....................................................................................................... 2-24
2.6.5 Interface Cable...................................................................................................... 2-24
2.6.6 Connecting Interface Cable................................................................................... 2-25
2.7 Router 1-Port FXS SIC/FXO SIC and Router 2-Port FXS SIC/FXO SIC ........................ 2-25
2.7.1 Introduction............................................................................................................ 2-25
2.7.2 Appearance........................................................................................................... 2-26
2.7.3 Interface Attributes ................................................................................................ 2-26
2.7.4 Interface LEDs....................................................................................................... 2-27
2.7.5 Interface Cable...................................................................................................... 2-28
2.7.6 Connecting Interface Cable................................................................................... 2-28
2.8 Router 1-Port SAE SIC .................................................................................................... 2-29
2.8.1 Introduction............................................................................................................ 2-29
2.8.2 Interface Attributes ................................................................................................ 2-29
2.8.3 Interface LEDs....................................................................................................... 2-30
2.8.4 Interface Cable...................................................................................................... 2-31
Chapter 3 Multifunctional Interface Modules (Router 5000) ..................................................... 3-1
3.1 Router 2-Port FXS/FXO/E&M MIM Modules &
Router 4-Port 4FXS/4FXO/4E&M MIM Modules .....................................................................
3-1
3.1.1 Introduction.............................................................................................................. 3-1
3.1.2 Appearance............................................................................................................. 3-1
3.1.3 Interface Attributes .................................................................................................. 3-2
3.1.4 Interface LEDs......................................................................................................... 3-3
3.1.5 Interface Cable........................................................................................................ 3-4
3.1.6 Connecting Interface Cable..................................................................................... 3-6
3.2 Router E1 Voice Module.................................................................................................... 3-7
3.2.1 Introduction.............................................................................................................. 3-7
3.2.2 Appearance............................................................................................................. 3-7
3.2.3 Interface Attributes .................................................................................................. 3-8
3.2.4 Interface LEDs......................................................................................................... 3-8
3.2.5 Interface Cable........................................................................................................ 3-9
3.2.6 Connecting Interface Cable................................................................................... 3-10
3.3 Router T1 Voice Module .................................................................................................. 3-11
ii
3Com Router 5000 and Router 6000 v2.41 Module Guide
Table of Contents
3.3.1 Introduction............................................................................................................ 3-11
3.3.2 Appearance........................................................................................................... 3-11
3.3.3 Interface Attributes ................................................................................................ 3-12
3.3.4 Interface LEDs....................................................................................................... 3-12
3.3.5 Interface Cable...................................................................................................... 3-13
3.3.6 Connecting Interface Cable................................................................................... 3-14
3.4 NDEC Module.................................................................................................................. 3-15
3.4.1 Introduction............................................................................................................ 3-15
3.4.2 Appearance........................................................................................................... 3-15
3.4.3 Interface Attributes ................................................................................................ 3-15
3.4.4 Interface LEDs....................................................................................................... 3-16
3.4.5 Troubleshooting..................................................................................................... 3-17
3.5 Router 2-Port 10/100 MIM ............................................................................................... 3-18
3.5.1 Introduction............................................................................................................ 3-18
3.5.2 Interface Attributes ................................................................................................ 3-18
3.5.3 Interface LEDs....................................................................................................... 3-18
3.5.4 Interface Cable...................................................................................................... 3-19
3.5.5 Connecting the Interface Cable............................................................................. 3-20
3.6 Router 4-Port Serial MIM Module .................................................................................... 3-20
3.6.1 Introduction............................................................................................................ 3-20
3.6.2 Interface Attributes ................................................................................................ 3-22
3.6.3 Interface LEDs....................................................................................................... 3-23
3.6.4 Interface Cable...................................................................................................... 3-23
3.6.5 Connecting the Interface Cable............................................................................. 3-24
3.7 Router 2 AND 4-Port Enhanced Serial MIM .................................................................... 3-25
3.7.1 Introduction............................................................................................................ 3-25
3.7.2 Interface Attributes ................................................................................................ 3-26
3.7.3 Interface LEDs....................................................................................................... 3-27
3.7.4 Interface Cable...................................................................................................... 3-28
3.7.5 Connecting the Interface Cable............................................................................. 3-31
3.8 Router 2 and 4-Port CE1/PRI MIM Modules ................................................................... 3-32
3.8.1 Introduction............................................................................................................ 3-32
3.8.2 Interface Attributes ................................................................................................ 3-32
3.8.3 Interface LEDs....................................................................................................... 3-33
3.8.4 Interface Cable...................................................................................................... 3-34
3.8.5 Internal DIP Switches............................................................................................ 3-37
3.8.6 Connecting the Interface Cable............................................................................. 3-38
3.9 Router 4-Port ISDN-S/T MIM Module.............................................................................. 3-41
3.9.1 Introduction............................................................................................................ 3-41
3.9.2 Interface Attributes ................................................................................................ 3-41
3.9.3 Internal DIP switches ............................................................................................ 3-42
3.9.4 Interface LEDs....................................................................................................... 3-43
iii
3Com Router 5000 and Router 6000 v2.41 Module Guide
Table of Contents
3.9.5 Interface Cable...................................................................................................... 3-43
3.9.6 Connecting the Interface Cable............................................................................. 3-43
3.10 Router 2-Port CT1/PRI MIM .......................................................................................... 3-44
3.10.1 Introduction.......................................................................................................... 3-44
3.10.2 Interface Attributes .............................................................................................. 3-44
3.10.3 Interface LEDs..................................................................................................... 3-45
3.10.4 Interface Cable.................................................................................................... 3-46
3.10.5 Connecting the Interface Cable........................................................................... 3-46
3.11 Router 1-Port ADSL Over POTS MIM ........................................................................... 3-47
3.11.1 Introduction.......................................................................................................... 3-47
3.11.2 Interface Attributes .............................................................................................. 3-48
3.11.3 Panel and Interface LED ..................................................................................... 3-48
3.11.4 Interface Cable.................................................................................................... 3-49
3.11.5 Connecting the Interface Cable........................................................................... 3-49
3.12 Router 2-Port ADSL Over POTS MIM ........................................................................... 3-50
3.12.1 Introduction.......................................................................................................... 3-50
3.12.2 Interface Attributes .............................................................................................. 3-50
3.12.3 Panel and Interface LED ..................................................................................... 3-51
3.12.4 Interface Cable.................................................................................................... 3-51
3.12.5 Connecting the Interface Cable........................................................................... 3-52
3.13 Router NDEC2 Encryption Accelerator MIM ................................................................. 3-52
3.13.1 Introduction.......................................................................................................... 3-52
3.13.2 Appearance......................................................................................................... 3-53
3.13.3 Interface Attributes .............................................................................................. 3-53
3.13.4 Interface LEDs..................................................................................................... 3-53
3.13.5 Troubleshooting .................................................................................................. 3-54
3.14 Router 4-Port E1 IMA MIM ............................................................................................ 3-55
3.14.1 Introduction.......................................................................................................... 3-55
3.14.2 Appearance of the Interface Card....................................................................... 3-55
3.14.3 Interface Attributes .............................................................................................. 3-55
3.14.4 Panels and Interface LEDs ................................................................................. 3-56
3.14.5 Interface Cable.................................................................................................... 3-57
3.14.6 Connection of the Interface Cable ...................................................................... 3-57
3.15 Router 4-Port T1 IMA MIM............................................................................................. 3-58
3.15.1 Introduction to the Interface card ........................................................................3-58
3.15.2 Appearance of the Interface Card....................................................................... 3-58
3.15.3 Interface Attributes .............................................................................................. 3-58
3.15.4 Panels and Interface LEDs ................................................................................. 3-59
3.15.5 Connection of the Interface Cable ...................................................................... 3-59
3.16 Router 1-Port CE3 MIM Module .................................................................................... 3-60
3.16.1 Introduction.......................................................................................................... 3-60
3.16.2 Interface Attributes .............................................................................................. 3-60
iv
3Com Router 5000 and Router 6000 v2.41 Module Guide
Table of Contents
3.16.3 Interface LEDs..................................................................................................... 3-61
3.16.4 Interface Cable.................................................................................................... 3-61
3.16.5 Connecting the Interface Cable........................................................................... 3-62
3.17 Router 1-Port CT3 MIM Module..................................................................................... 3-62
3.17.1 Introduction.......................................................................................................... 3-62
3.17.2 Interface Attributes .............................................................................................. 3-63
3.17.3 Interface LEDs..................................................................................................... 3-63
3.17.4 Interface Cable.................................................................................................... 3-64
3.18 Router 1-Port 10/100/1000 MIM .................................................................................... 3-64
3.18.1 Introduction.......................................................................................................... 3-64
3.18.2 Interface Attributes .............................................................................................. 3-64
3.18.3 Interface Cable.................................................................................................... 3-65
3.18.4 Connecting the Interface Cable........................................................................... 3-65
Chapter 4 Flexible Interface Cards (Router 6000)...................................................................... 4-1
4.1 Router 2-Port 10/100 FIC .................................................................................................. 4-1
4.1.1 Introduction.............................................................................................................. 4-1
4.1.2 Interface Attributes .................................................................................................. 4-1
4.1.3 Panel and Interface LEDs ....................................................................................... 4-1
4.1.4 Interface Cable........................................................................................................ 4-2
4.1.5 Connecting the Interface Cable............................................................................... 4-3
4.2 Router 1-Port 100FX MM FIC/100FX SM FIC................................................................... 4-3
4.2.1 Introduction.............................................................................................................. 4-3
4.2.2 Interface Attributes .................................................................................................. 4-4
4.2.3 Panel and Interface LEDs ....................................................................................... 4-5
4.2.4 Interface Optical Fiber............................................................................................. 4-5
4.2.5 Connecting the Interface Optical Fiber ................................................................... 4-6
4.3 Router 1-Port 10/100/1000 FIC ......................................................................................... 4-7
4.3.1 Introduction.............................................................................................................. 4-7
4.3.2 Interface Attributes .................................................................................................. 4-7
4.3.3 Panel and Interface LEDs ....................................................................................... 4-8
4.3.4 Interface Cable........................................................................................................ 4-8
4.3.5 Connecting the Interface Cable............................................................................... 4-8
4.4 Router 1-Port Gigabit Ethernet Fiber FIC .......................................................................... 4-9
4.4.1 Introduction.............................................................................................................. 4-9
4.4.2 Interface Attributes .................................................................................................. 4-9
4.4.3 Panel and Interface LEDs ....................................................................................... 4-9
4.4.4 Interface Cable...................................................................................................... 4-10
4.4.5 Connecting the Interface Optic Fiber .................................................................... 4-11
4.5 1-Port GEF FIC................................................................................................................ 4-11
4.5.1 Introduction............................................................................................................ 4-11
4.5.2 Interface Attributes ................................................................................................ 4-12
4.5.3 Interface LEDs....................................................................................................... 4-12
v
3Com Router 5000 and Router 6000 v2.41 Module Guide
Table of Contents
4.5.4 Interface Cable...................................................................................................... 4-13
4.5.5 Connecting the Interface Optic Fiber .................................................................... 4-14
4.6 Router 4-Port/8-Port Enhanced Serial FIC ...................................................................... 4-14
4.6.1 Introduction............................................................................................................ 4-14
4.6.2 Interface Attributes ................................................................................................ 4-16
4.6.3 Panel and Interface LEDs ..................................................................................... 4-17
4.6.4 Interface Cable...................................................................................................... 4-17
4.6.5 Connecting the Interface Cable............................................................................. 4-20
4.7 Router 4-Port CE1/PRI FIC ............................................................................................. 4-21
4.7.1 Introduction............................................................................................................ 4-21
4.7.2 Interface Attributes ................................................................................................ 4-21
4.7.3 Panel and Interface LEDs ..................................................................................... 4-22
4.7.4 Interface Cable...................................................................................................... 4-23
4.7.5 Internal DIP Switch................................................................................................ 4-25
4.7.6 Connecting the Interface Cable............................................................................. 4-26
4.8 Router 4-Port CT1/PRI FIC and Router 4-Port Fractional T1 FIC................................... 4-28
4.8.1 Introduction............................................................................................................ 4-28
4.8.2 Interface Attributes ................................................................................................ 4-28
4.8.3 Panel and Interface LEDs ..................................................................................... 4-29
4.8.4 Interface Cable...................................................................................................... 4-29
4.8.5 Connecting the Interface Cable............................................................................. 4-30
4.9 Router 1-Port CE3 FIC .................................................................................................... 4-31
4.9.1 Introduction............................................................................................................ 4-31
4.9.2 Interface Attributes ................................................................................................ 4-31
4.9.3 Panel and Interface LEDs ..................................................................................... 4-32
4.9.4 Interface Cable...................................................................................................... 4-32
4.9.5 Connecting the Interface Cable............................................................................. 4-33
4.10 Router 1-Port CT3 FIC................................................................................................... 4-33
4.10.1 Introduction.......................................................................................................... 4-33
4.10.2 Interface Attributes .............................................................................................. 4-33
4.10.3 Panel and Interface LEDs ................................................................................... 4-34
4.10.4 Interface Cable.................................................................................................... 4-34
4.11 8.8 Router 1-Port E3 ATM FIC.................................................................................... 4-35
4.11.1 Introduction.......................................................................................................... 4-35
4.11.2 Interface Attributes .............................................................................................. 4-35
4.11.3 Panel and Interface LEDs ................................................................................... 4-36
4.11.4 Interface Cable.................................................................................................... 4-36
4.11.5 Connecting the Interface Cable........................................................................... 4-37
4.12 Router 1-Port T3 ATM FIC............................................................................................. 4-37
4.12.1 Introduction.......................................................................................................... 4-37
4.12.2 Interface Attributes .............................................................................................. 4-37
4.12.3 Panel and Interface LEDs ................................................................................... 4-38
vi
3Com Router 5000 and Router 6000 v2.41 Module Guide
Table of Contents
4.12.4 Interface Cable.................................................................................................... 4-39
4.12.5 Connecting the Interface Cable........................................................................... 4-39
4.13 Router 1-Port OC-3 ATM MM FIC & Router 1-Port OC-3 ATM SM FIC &
Router 1-Port OC-3 ATM SML FIC........................................................................................
4.13.1 Introduction.......................................................................................................... 4-40
4.13.2 Interface Attributes .............................................................................................. 4-40
4.13.3 Panel and Interface LEDs ................................................................................... 4-41
4.13.4 Interface Optical Fiber......................................................................................... 4-44
4.14 Router 1/2-Port ADSL FIC ............................................................................................. 4-45
4.14.1 Introduction.......................................................................................................... 4-45
4.14.2 Interface Attributes .............................................................................................. 4-45
4.14.3 Panel and Interface LED ..................................................................................... 4-46
4.14.4 Interface Cable.................................................................................................... 4-46
4.14.5 Connecting the Interface Cable........................................................................... 4-47
4.15 Router 1-Port ADSL FIC/Router 2-Port ADSL FIC........................................................ 4-47
4.15.1 Introduction.......................................................................................................... 4-47
4.15.2 Interface Attributes .............................................................................................. 4-48
4.15.3 Panel and Interface LEDs ................................................................................... 4-48
4.15.4 Interface Cable.................................................................................................... 4-49
4.15.5 Connecting the Interface Cable........................................................................... 4-49
4.16 Router 4-Port E1 IMA FIC.............................................................................................. 4-50
4.16.1 Introduction.......................................................................................................... 4-50
4.16.2 Interface Attributes .............................................................................................. 4-50
4.16.3 Panel and Interface LEDs ................................................................................... 4-51
4.16.4 Interface Cable.................................................................................................... 4-51
4.16.5 Connecting the Interface Cable........................................................................... 4-52
4.17 Router 4-Port T1 IMA FIC.............................................................................................. 4-53
4.17.1 Introduction.......................................................................................................... 4-53
4.17.2 Interface Attributes .............................................................................................. 4-53
4.17.3 Panel and Interface LEDs ................................................................................... 4-54
4.17.4 Interface Cable.................................................................................................... 4-54
4.17.5 Connecting the Interface Cable........................................................................... 4-54
4.18 Router 1-Port OC3 POS FIC ......................................................................................... 4-54
4.18.1 Introduction.......................................................................................................... 4-54
4.18.2 Interface Attributes .............................................................................................. 4-55
4.18.3 Panel and Interface LEDs ................................................................................... 4-56
4.18.4 Connecting the Interface Optical Fiber ............................................................... 4-57
4.19 Router 2-Port FXS/2-Port FXO FIC and Router 4-Port FXS/4-Port FXO FIC ............... 4-57
4.19.1 Introduction.......................................................................................................... 4-57
4.19.2 Interface Attributes .............................................................................................. 4-58
4.19.3 Panel and Interface LEDs ................................................................................... 4-58
4.19.4 Interface Cable.................................................................................................... 4-59
4-40
vii
3Com Router 5000 and Router 6000 v2.41 Module Guide
Table of Contents
4.19.5 Connecting the Interface Cable........................................................................... 4-60
4.20 Router 1-Port E1 Voice FIC ........................................................................................... 4-60
4.20.1 Introduction.......................................................................................................... 4-60
4.20.2 Interface Attributes .............................................................................................. 4-61
4.20.3 Panel and Interface LEDs ................................................................................... 4-61
4.20.4 Interface Cable.................................................................................................... 4-62
4.20.5 Connecting the Interface Cable........................................................................... 4-63
4.21 Router 1-Port T1 Voice FIC ........................................................................................... 4-64
4.21.1 Introduction.......................................................................................................... 4-64
4.21.2 Interface Attributes .............................................................................................. 4-64
4.21.3 Panel and Interface LEDs ................................................................................... 4-64
4.21.4 Interface Cable.................................................................................................... 4-65
4.21.5 Connecting the Interface Cable........................................................................... 4-65
4.22 Router NDEC2 Encryption Accelerator FIC................................................................... 4-66
4.22.1 Introduction.......................................................................................................... 4-66
4.22.2 Interface Features ............................................................................................... 4-66
4.22.3 Panel and LEDs .................................................................................................. 4-67
4.22.4 Troubleshooting .................................................................................................. 4-67
4.23 RPU2 Encryption Accelerator ........................................................................................ 4-68
4.23.2 Specifications ...................................................................................................... 4-69
4.23.3 LED and button ................................................................................................... 4-69
4.23.4 Interface .............................................................................................................. 4-70
4.23.5 Encryption daughter card .................................................................................... 4-70
viii
3Com Router 5000 and Router 6000 v2.41 Module Guide

Chapter 1 Overview

Information about interface cards and modules other than Smart Interface Cards
(SICs), Multi-Functional Interface Modules (MIMs), and Flexible Interface Cards (FICs)
are beyond the scope of this manual. This specifically addresses the modules
associated with this release. Information on other modules appears in the Router
5000 or Router 6000 Family Installation Manuals.

1.1 Types of SICs

3Com 5000 Router Family provide two SIC slots which can accept the following types
of SICs for this release.
z Router 1-Port 10/100 SIC (3C13712)
z Router 1-Port Serial SIC (3C13714)
z Router 1-Port SAE SIC card (3C13715)
z Router 2-Port ISDN-S/T SIC (3C13716)
z Router 2-Port ISDN-U SIC (3C13718)
z Router 1-Port Fractional T1 SIC (3C13720A)
z Router 1-Port Fractional E1 SIC (3C13722)
z Router 1-Port Analog Modem SIC (3C13724)
z Router 1-port FXS SIC card (3C13725)
z Router 2-port FXS SIC card (3C13726)
z Router 1-port FXO SIC card (3C13727)
z Router 2-port FXO SIC card (3C13728)
Chapter 1 Overview

1.2 Types of MIMs

3Com 5000 Router Family modular routers provide MIM slots for this release and
support the following MIMs:
z Router 2-Port 10/100 MIM ((3C13761)
z Router 2-Port Enhanced Serial MIM (3C13762)
z Router 4-Port Serial MIM (3C13763)
z Router 4-Port Enhanced Serial MIM (3C13764)
z Router 2-Port CE1/PRI MIM (3C13765)
z Router 4-Port CE1/PRI MIM (3C13766)
z Router 4-Port ISDN-S/T MIM (3C13767)
z Router 2-Port CT1/PRI MIM (3C13769A)
z Router 1-Port ADSL over POTS MIM (3C13770)
z Router NDEC Encryption Accelerator MIM (3C13771-75)
z Router 2-Port ADSL over POTS MIM (3C13772)
1-1
3Com Router 5000 and Router 6000 v2.41 Module Guide
z Router NDEC2 Encryption Accelerator MIM (3CR13773-75)
z Router 1-Port 10/100/1000 MIM (3C13774)
z Router 1-Port CT-3 MIM (3C13775A)
z Router 1-Port CE3 MIM (3C13777)
z Router 4-Port E1 IMA MIM (3C13778)
z Router 4-Port T1 IMA MIM (3C13779)
z Router 2-port FXS MIM module (3C13780)
z Router 2-port FXO MIM module (3C13783)
z Router 2-port E&M MIM module (3C13785)
z Router 4-port FXS MIM module (3C13781)
z Router 4-port FXO MIM module (3C13784)
z Router 4-port E&M module (3C13786)
z Router 1-port E1 Voice MIM module (3C13787)
z Router 1-port T1 Voice MIM module (3C13788)

1.3 Types of FICs

Chapter 1 Overview
3Com 6000 Router Family modular routers provide FIC slots for this release and
support the following FICs:
z Router 1-Port 100FX MM FIC (3C13860)
z Router 2-Port 10/100 FIC (3C13861)
z Router 1-Port 100FX SM FIC (3C13862)
z Router 4-Port Enhanced Serial FIC (3C13863)
z Router 8-Port Enhanced Serial FIC (3C13864)
z Router 4-Port CE1/PRI FIC (3C13866)
z Router 4-Port CT1/PRI FIC (3C13870A)
z Router 1-Port ADSL (over POTS) FIC (3C13871)
z Router 2-Port ADSL (over POTS) FIC (3C13872)
z Router NDEC2 Encryption Accelerator FIC (3CR13873-75)
z Router 4-Port E1 IMA FIC (3C13874)
z Router 4-Port T1 IMA FIC (3C13875)
z Router 1-Port E3 ATM FIC (3C13876)
z Router 1-Port T3 ATM FIC (3C13877)
z Router 4-Port Fractional T1 FIC (3C13821)
z Router 4-Port Fractional E1 FIC (3C13823)
z Router 1-Port OC-3 POS FIC (3C13881)
z Router 1-Port OC-3 ATM MM FIC (3C13882)
z Router 1-Port OC-3 ATM SM FIC (3C13884)
z Router 1-Port OC-3 ATM SML FIC (3C13886)
z Router 1-Port 10/100/1000 FIC (3C13887)
z Router 1-Port Gigabit Ethernet Fiber FIC (3C13879)
z Router 1-Port 1000Base-SX SFP FIC (3CSFP91)
1-2
3Com Router 5000 and Router 6000 v2.41 Module Guide
z Router 1-Port CE3 FIC (3C13888)
z Router 1-Port CT3 FIC (3C13889A)
z Router 1-Port Fractional T1 FIC (3C13889A)
z Router 1-Port Fractional T3 FIC (3C13889A)
z Router 2-Port FXS FIC (3C13890)
z Router 4-Port FXS FIC (3C13891)
z Router 2-Port FXO FIC (3C13893)
z Router 4-Port FXO FIC (3C13894)
z Router 2-Port E&M FIC (3C13895)
z Router 4-Port E&M FIC (3C13896)
z Router 1-Port E1 Voice FIC (3C13897)
z Router 1-Port T1 Voice FIC (3C13898)
z Router RPU2 Encryption Accelerator FIC (3CR13806-75)

1.4 SIC/MIM Purchasing Guideline

Chapter 1 Overview
You may equip a 3Com Series Modular Router with appropriate SICs and MIMs and
are allowed to:
z Install several SICs or MIMs of the same type on the router;
z Install a SIC or MIM in any slot on the router, disregarding its type.
Also, you should:
z Select interface cable appropriate to each SIC or MIM;

1.5 Installation/Removal of SIC and MIM

Warning:
3Com 5000 Family Routers do not support online insertion and removal of SICs and MIMs. Before
implementing any of the following operations, wear an anti-static wrist strap and ESD-preventive glove,
and make sure that the power of the Router has been turned off and the power cord has been
unplugged. Otherwise, the operator may get an electric shock or the Router may get damaged.
Caution:
z The electromagnetic interference (EMI) gaskets on the front panel of each MIM/SIC can protect the
whole router. Please leave the gaskets intact when uninstalling or replacing the MIM/SIC and never
remove them;
1-3
3Com Router 5000 and Router 6000 v2.41 Module Guide
z In case of the possible damage to MIMs, put the MIMs on the Printed Circuit Board (PCB) tray during
the installation and replacement;
z Hold the circuit board by the edge and do not touch the components and the surface of the PCB;
z If you are not planning to install a new MIM/SIC after removing the old one, install a blank filler panel
to keep the chassis dust-free and thereby to ensure the normal ventilation of the Router.
1.5.1 Installing/Removing SIC
I. Tools required
z Flat-blade screwdriver z ESD-preventive wrist strap and ESD-preventive glove
II. Removing blank filler panel from SIC slot
Following the rotating direction shown in this figure, remove the captive screws of the blank filler panel using the flat-blade screwdriver.
Chapter 1 Overview
Figure 1-1 Removing the blank filler panel from a SIC slot
III. Installing SIC
Follow these steps to install a SIC:
Step 1: Place the rear panel of the Router towards you;
Step 2: Turn off the power switch of the Router and unplug the power cord;
Step 3: Take out the SIC and align its remote edge with the edge of the slot on the Router’s rear panel;
Step 4: Push the SIC into the Router until it closely mates with the rear panel of the Router;
Step 5: Fasten the SIC into the Router with captive screws;
Step 6: Power on the Router, and check the LEDs of the corresponding slot on the
front panel: after the initialization of the SIC, ON means that the SIC is operating
normally and OFF means that its Power-On Self-Test (POST) has failed. In the latter case, please contact your agent.
1-4
3Com Router 5000 and Router 6000 v2.41 Module Guide
Figure 1-2 Installing SIC
IV. Removing SIC
Follow these steps to remove a SIC:
Step 1: Place the rear panel of the Router towards you;
Chapter 1 Overview
Step 2: Turn off the power switch of the Router and unplug the power cord;
Step 3: Unplug all the network interface cables connected to the rear panel of the Router;
Step 4: Remove the captive screws on both sides of the SIC using the flat-blade screwdriver;
Step 5: Pull the SIC outward until it is completely taken out of the Router chassis.
1.5.2 Installing/Removing MIM
I. Tools required
z Flat-blade screwdriver
z ESD-preventive wrist strap and ESD-preventive glove
II. Installing MIM
Follow these steps to install a MIM:
Step 1: Place the rear panel of the Router towards you;
Step 2: Turn off the power switch of the Router and unplug the power cord;
Step 3: Select a slot and insert the MIM along the guides in the slot until it contacts the
rear panel of the Router;
Step 4: Fix the MIM into the Router with captive screws;
Step 5: Power on the Router, and check the LEDs of the corresponding slot on the
front panel: ON means that the MIM is operating normally and OFF means that the
POST of the MIM has failed. In the latter case, please contact your agent.
1-5
3Com Router 5000 and Router 6000 v2.41 Module Guide
Figure 1-3 Installing MIM (1)
Chapter 1 Overview
Figure 1-4 Installing MIM (2)
III. Removing MIM
Follow these steps to remove a MIM:
Step 1: Place the rear panel of the Router towards you;
Step 2: Turn off the power switch of the Router and unplug the power cord;
Step 3: Unplug all interface cables from the rear panel of the Router;
Step 4: Loosen the captive screws at both sides of the MIM;
Step 5: Pull the MIM towards you until it is completely separated from the bottom of the
router.
1.5.3 Installing/Removing an FIC
Caution:
The EMI gaskets on the FIC panel can filter electromagnetic interference of the router.
Do not damage them when uninstalling or replacing an FIC.
If you do not install a new FIC after removing the old one, replace the blank filter panel
to keep off the dust and ensure adequate ventilation of the router.
1-6
3Com Router 5000 and Router 6000 v2.41 Module Guide
Chapter 1 Overview
The router series supports hot swapping. Thus, you can remove or install FICs when
the router is running without disconnecting the power supply. But before that, you must
first execute the remove slot command; otherwise, unknown errors might occur. When
you replace the removed FICs, you do not need to execute the undo remove slot
command however.
If you execute the remove slot command inadvertently, you can cancel that operation
by using the undo remove slot command.
I. Tools required
ESD-preventive wrist strap
II. Removing an FIC
Step 1: Place the router with the front panel forward.
Step 2: Remove the cables connected to the FIC.
Step 3: Loosen the captive screws at both sides of the FIC.
Step 4: Push the ejector levers at both sides of the FIC outward, pull the FIC out of the slot
along the guides until disengaging it totally from the slot.
III. Installing an FIC
Step 1: Place the router with the front panel forward.
Step 2: Align the remote edge of the FIC with the slot edge, push it into the slot, push the
ejector levers inward until it presses against the FIC panel (the angles thus formed
between the FIC panel and the levers are the minimum angles).
Step 3: Fix the FIC in the chassis by fastening the captive screws.
Repeat these steps to install all the other FICs.

1.6 Troubleshooting

3Com 5000 Routers LEDs, indicate the state of the module as follows:
After the installation of a SIC/MIM, turn on the power and view the corresponding
LEDs (such as SLOT0, SLOT1 or SLOT2) on the cover of the Router chassis: ON
means that the SIC/MIM is operating normally and OFF means that the Power-On
Self-Test (POST) of the SIC/MIM has failed.
If the installed SIC/MIM is in abnormal state, check that:
z Proper interface cable is used;
z The LEDs on the panel of SIC/MIM are displaying normally (see the section
introducing the SIC/MIM for its LED status and description);
z The SIC/MIM accepts the configuration and works well using the display
command.
1-7
3Com Router 5000 and Router 6000 v2.41 Module Guide
Chapter 2 Smart Interface Cards

Chapter 2 Smart Interface Cards (Router 5000)

2.1 Router 1-Port 10/100 SIC

1-port 10Base-T/100Base-TX Ethernet interface card, in which FE stands for Fast
Ethernet module. This is used to implement the communication between Routers and
LANs. It supports:
z Effective transmission distance of 100 meters with category-5 twisted pair cables;
z Operating speeds of both 100 Mbps and 10 Mbps and autosensing;
z Both full duplex (in common use) and half-duplex operating modes.
2.1.1 Interface Attributes
The interface attributes of Router 1-Port 10/100 SIC are given in the following table:
Table 2-1 Interface attributes of Router 1-Port 10/100 SIC
Attribute Router 1-Port 10/100 SIC
Connector type RJ-45
Interface type MDI
Number of connectors 1
Cable type Straight-through Ethernet cable
Router 1-Port 10/100 SIC panel is shown in the following figure:
Figure 2-1 Router 1-Port 10/100 SIC panel
The status description of the LEDs on Router 1-Port 10/100 SIC panel is listed in the
following table:
Table 2-2 Description of the LEDs on Router 1-Port 10/100 SIC panel
LINK OFF means no link is present; ON means a link is present.
ACT
OFF means no data is being transmitted or received; blinking means data is
2-1
3Com Router 5000 and Router 6000 v2.41 Module Guide
being received or/and transmitted.
2.1.2 Interface Cable
Normally, category-5 twisted pair cable is adopted to connect the 10BASE-T
/100BASE-TX Ethernet interface to the Ethernet, as shown in the following figure:
Figure 2-2 Ethernet cable
Ethernet cables fall into two categories: straight-through cables and crossover cables,
specifically,
Chapter 2 Smart Interface Cards
z Straight-through cable: the wire sequences of the twisted pair cable crimped in
the RJ-45 connectors at both ends are completely the same. It is used to connect
terminal devices (such as PCs, routers) to Hubs or LAN Switches.
z Crossover cable: The wire sequences of twisted pair cable crimped in the RJ-45
connectors at both ends are different. It can be used to connect two terminal
devices (such as PCs and Routers). You can such kind of cables by yourself if
necessary.
2.1.3 Connecting the Interface Cable
If the SIC has been properly installed, follow these steps to connect the interface
cable:
Step 1: Connect the Ethernet port of SIC to a PC or router using a crossover cable and
to a Hub or LAN Switch using a straight-through cable;
Step 2: Power on the Router and check the SLOT1 LED on its front panel: ON means
that the SIC is operating normally and OFF means that the Power-On Self-Test (POST)
of the SIC has failed. In the latter case, please contact your agent.
Step 3: Check the status of LINK LED on the panel: ON means the link is connected
and OFF means the link is not connected. In the latter case, check the line.
2-2
3Com Router 5000 and Router 6000 v2.41 Module Guide

2.2 Router 1-Port Serial SIC

2.2.1 Introduction
1-port multiprotocol synchronous/asynchronous serial interface card (Router 1-Port
Serial SIC) supports both synchronous and asynchronous operating modes. It supports:
z Transmission/Receiving and handling of synchronous and asynchronous serial
data streams;
z Different operating modes, such as V.24/V.35 and DTE/DCE, depending on the
actual applications;
z Automatic external cable type detection without the need of manual configuration; z Local loopback and remote loopback, facilitating fault test and location.
I. Synchronous and asynchronous
In different operating modes, a synchronous/asynchronous serial interface supports
different signal standards and baud rates and the maximum transmission distance of the signals is related to the baud rate setting. For the relationships between cable type, baud rate setting and signal transmission distance, see the following table.
Chapter 2 Smart Interface Cards
Table 2-3 Baud rate and transmission distance of V.24 (RS232)/V.35 cable
V.24 (RS232) V.35
Baud rate (bps)
Maximum
transmission
Distance (m)
Baud rate (bps)
Maximum
transmission
Distance (m)
2400 60 2400 1250
4800 60 4800 625
9600 30 9600 312
19200 30 19200 156
38400 20 38400 78
64000 20 56000 60
115200 10 64000 50
- - 2048000 30
2-3
3Com Router 5000 and Router 6000 v2.41 Module Guide
Caution:
The baud rate cannot exceed 64 kbps if V.24 cable is used and the interface operates in synchronous mode.
II. DTE and DCE
The synchronous serial interface supports both DTE (Data Terminal Equipment) and DCE (Data Circuit-terminating Equipment) operating modes. Given that two devices
are directly connected, if one operates in the DTE mode, the other will operate in the
DCE mode. The DCE device provides the synchronous clock and specifies the
communicating rate. The DTE device receives the synchronous clock and communicates at the specified rate. Generally, the Router is used as a DTE device. To
make sure that the device is a DTE or DCE, refer to the manual shipped with this
device. In addition, the following table may also help you to identify the type of the device.
Chapter 2 Smart Interface Cards
Table 2-4 Typical DTE and DCE equipment
Equipment type Interface type Typical equipment
DTE Male PC, Router
DCE Female Modem, Multiplexer, CSU/DSU
Asynchronous serial interface is generally used as dialing port and connected to a
modem or a Terminal Adapter (TA). In this case, regardless of the operating mode of the device, only an appropriate baud rate for the interface needs to be selected.
Synchronous serial interface is generally used for the direct connection to such a device as DDN, frame relay, or X.25 switch.
2.2.2 Appearance
Router 1-Port Serial SIC is illustrated in the following figure:
2-4
3Com Router 5000 and Router 6000 v2.41 Module Guide
Figure 2-3 Router 1-Port Serial SIC
2.2.3 Interface Attributes
The interface attributes of Router 1-Port Serial SIC are given in the following table:
Table 2-5 Interface attributes of Router 1-Port Serial SIC
Attribute
Chapter 2 Smart Interface Cards
Description
Synchronous Asynchronous
Connector type DB50
Number of
connectors
1
V.24 (RS232) DTE cable
V.24 (RS232) DCE cable
Cable type
V.35 DTE cable
V.35 DCE cable
Interface standard
and Operating mode
Minimum baud rate
(bps)
Maximum baud rate
(bps)
V.24 V.35
DTE, DCE DTE DCE
1200 1200 1200 300
64K 4.096M 2.048M 115.2K
RS232
2-5
3Com Router 5000 and Router 6000 v2.41 Module Guide
Attribute
Chapter 2 Smart Interface Cards
Description
Synchronous Asynchronous
Modem dial-up
Supported service
2.2.4 Interface LEDs
Router 1-Port Serial SIC panel is shown in the following figure:
Figure 2-4 Router 1-Port Serial SIC panel
The status description of the LEDs on Router 1-Port Serial SIC panel is listed in the following table:
DDN leased line
Terminal access
Backup
Dumb terminal
access
Asynchronous
leased line
Backup
Table 2-6 Description of the LEDs on Router 1-Port Serial SIC panel
LINK OFF means no link is present; ON means a link is present.
ACT
2.2.5 Interface Cable
Router 1-Port Serial SIC interface cables are synchronous/asynchronous serial interface cables that fit into four types:
z V.24 (RS232) DTE cable, with DB25 (male) connector at the network end; z V.24 (RS232) DCE cable, with DB25 (female) connector at the network end; z V.35 DTE cable, with 34PIN (male) connector at the network end; z V.35 DCE cable, with 34PIN (female) connector at the network end.
OFF means no data is being transmitted or received; blinking means data is being
received or/and transmitted.
2-6
3Com Router 5000 and Router 6000 v2.41 Module Guide
At one end of these cables is DB50 connector for the connection to a router, and at the
other end (network end) is a connector whose type varies by the network device (or
line type) to be connected.
Caution:
The four types of cables listed above are optional, which must be selected while purchasing the Router
1-Port Serial SIC. Otherwise they will not be supplied.
z V.24 (RS232) DTE cable
Chapter 2 Smart Interface Cards
Figure 2-5 V.24 (RS232) DTE cable
z V.24 (RS232) DCE cable
Figure 2-6 V.24 (RS232) DCE cable
z V.35 DTE cable
2-7
3Com Router 5000 and Router 6000 v2.41 Module Guide
Figure 2-7 V.35 DTE cable
z V.35 DCE cable
Chapter 2 Smart Interface Cards
Figure 2-8 V.35 DCE cable
For the pinouts of synchronous/asynchronous serial interface cable, see Low-End and Mid-Range Series Routers Cable Manual.
2.2.6 Connecting Interface Cable
Warning:
Do not plug or unplug synchronous/asynchronous serial interface cables when the Router has power.
Otherwise, it is likely to damage the equipment and ports.
If the SIC has been properly installed, follow these steps to connect the synchronous/asynchronous serial interface cable:
Step 1: Insert the DB50 connector of the cable into the DB50 port on the Router 1-Port Serial SIC;
Step 2: Connect the other end of the cable to:
z CSU/DSU (a type of data transfer device), if the WAN is a DDN line, or z Analog modem, if the WAN is a dial-up line.
2-8
3Com Router 5000 and Router 6000 v2.41 Module Guide
Step 3: Power on the Router, and check the LEDs of the corresponding slot on the
front panel: ON means that the SIC is operating normally and OFF means that the POST of the SIC has failed. In the latter case, please contact your agent;
Step 4: Check the status of LINK LED on the Router 1-Port Serial SIC panel: ON
means the link is connected and OFF means the link is not connected. In the latter case, check the line.
Chapter 2 Smart Interface Cards

2.3 Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC

2.3.1 Introduction
1/2-port ISDN BRI S/T interface cards (Router 2-Port ISDN-S/T SIC) serve to
transmit/receive and handle one and two channels of ISDN BRI S/T data streams.
1/2-port ISDN BRI U interface cards (Router 2-Port ISDN-U SIC) server to transmit/receive and handle one and two channels of ISDN BRI U data streams.
Both Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC have two types of operating modes: dial-up and leased line.
2.3.2 Appearance
Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC are shown in the following figures:
Figure 2-9 Router 2-Port ISDN-S/T SIC
2-9
3Com Router 5000 and Router 6000 v2.41 Module Guide
Figure 2-10 Router 2-Port ISDN-U SIC
2.3.3 Interface Attributes
The interface attributes of Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC are given in the following table:
Table 2-7 Interface attributes of Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC
Chapter 2 Smart Interface Cards
Attribute Description
RJ45 (Router 2-Port ISDN-S/T SIC)
Connector type
RJ45 (Router 2-Port ISDN-U SIC, compatible with RJ11)
1
Number of connectors
2
Cable type Telephone cable with ferrite core
Protocol standard ITU-T I.430, Q.921, Q.931 Recommendations
ISDN dial-up mode
Operating mode
ISDN leased line mode
ISDN
ISDN complementary services
Supported service
Multi-user number
Sub-address
Backup
2.3.4 Interface LEDs
Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC panels are shown in the following figures:
2-10
3Com Router 5000 and Router 6000 v2.41 Module Guide
Figure 2-11 SIC-2BS panel
Figure 2-12 SIC-2BU panel
The status description of the LEDs is given in the following table:
Table 2-8 Description of the LEDs on SIC-BS and SIC-BU panels
LED Description
Chapter 2 Smart Interface Cards
B1
B2
ACT
OFF means B1 channel is idle. Blinking means B1 channel is occupied and
data communication is being conducted.
OFF means B2 channel is idle. Blinking means B2 channel is occupied and
data communication is being conducted.
OFF means deactivation. Blinking means activating process. ON means
active status.
OFF means the power to the SIC is disconnected (caused by the failure of
ON
power supply to the SIC and so on). ON means the SIC is normally
powered on.
Note:
For ISDN, “active” describes the action or process that a terminal device synchronizes the network clock.
It belongs to the physical layer category. In order to decrease power consumption of exchange device
and etc., usually the terminals and network (LT port) should be “deactivated”.
2.3.5 Interface Cable
Both of Router 2-Port ISDN-S/T SIC and Router 2-Port ISDN-U SIC use the telephone
cable with ferrite core.
2-11
3Com Router 5000 and Router 6000 v2.41 Module Guide
Caution:
The relevant cables have been included in the standard configurations of Router 2-Port ISDN-S/T SIC
and Router 2-Port ISDN-U SIC.
2.3.6 Connecting Interface Cable
Caution:
z You should connect a cable to the port with the correct mark. Misplugging is prone to impair the
SIC/MIM and even damage the router.
z When using a telephone cable with ferrite core outdoors, you are recommended to install a special
lightning arrester on the input end of the cable in order to avoid lightning more effectively.
Chapter 2 Smart Interface Cards
If the SIC has been properly installed, follow these steps to connect the cable:
Step 1: Confirm the type of the ISDN line provided by your telecom service provider;
Step 2: Connect the cable;
z For Router 2-Port ISDN-S/T SIC
If the ISDN U interface is adopted for the line, use NT1 for conversion. The connecting
procedure is to insert one end of the telephone cable with ferrite core into the BRI S/T interface of Router 2-Port ISDN-S/T SIC and the other end into the NT1.
If the line uses the ISDN S/T interface, directly insert the cable with ferrite core into the
BRI S/T interface of the Router 2-Port ISDN-S/T SIC and the other end into the ISDN S/T interface.
z For Router 2-Port ISDN-U SIC
If the ISDN U interface is adopted for the line, directly insert the cable with ferrite core
into the BRI U interface of the Router 2-Port ISDN-U SIC and the other end into the ISDN U interface.
If the line uses the ISDN S/T interface, contact the agent and replace the SIC with Router 2-Port ISDN-S/T SIC.
Step 3: Power on the Router, and check the corresponding Related LED on the front
panel of the Router. If the LED is ON, it indicates that the SIC has passed the self-test
and can operate normally. If the LED is OFF, it indicates the failure of the self-test. In such a case, please contact your agent.
2-12
3Com Router 5000 and Router 6000 v2.41 Module Guide
Step 4: Check the LED on the SIC panel: ON means the SIC is normally powered on.
If it is OFF, contact the agent.
Chapter 2 Smart Interface Cards

2.4 Router 1-Port Fractional E1 SIC

2.4.1 Introduction
1-port channelized E1/cE1/PRI compatible interface card supports:
z Transmission/Receiving and handling of E1 data streams; z CE1 (channelized E1) access; z ISDN PRI function; z Remote loopback and local loopback functions, facilitating fault test and location.
It is possible to use the card for multiple purposes through different configurations.
Following are the differences between SIC-EPRI and 1-port Fractional E1 interface
card (Router 1-Port Fractional E1 SIC):
z FE1 mode of Router 1-Port Fractional E1 SIC can support only one channel
bundle (the rate is n x 64kbps, n=1-31), while the 31 channels can be grouped
into multiple arbitrary bundles by SIC-EPRI;
z Router 1-Port Fractional E1 SIC does not support PRI mode.
2.4.2 Appearance
Figure 2-13 Router 1-Port Fractional E1 SIC
2.4.3 Interface Attributes
The interface attributes of Router 1-Port Fractional E1 SIC are given in the following table:
2-13
Loading...
+ 157 hidden pages